beautypg.com

Tarting a, Atch, Etup – MF Digital Ripstation Lite v4.4.11.0 User Manual

Page 32

background image

Ripstation v4.4 Main User Guide

100-5-01-000

Ripstation v4.4 – User Manual

Page 32 of 43

4.5 Starting a New Batch

4.5.1 Batch Setup

In the main Ripstation screen, click the ‘New Batch’ button and the Start a New

Batch dialog box shown in figure 4.14 appears.

Figure 4.14– Batch Properties Dialog Box

Source Device – select the model of robotic device you are using, or IDE/USB

Drives to use internal or external CD/DVD Rom drives with no robotics.

Edit – additional edits can be made such as COM port, Shake mode (on/off) and

for MFD 7602/7604 devices, the option to select which side the drives are on.

Shake mode was introduced to address sticking discs being double loaded into

drive tray. It is not supported by the 7601 robotic loader.

Figure 4.15 – Source Device Edit Dialog Box

Number of CDs - key in the number of CDs in the batch, or 0 to rip indefinitely.

Target device – Use Generic for any portable devices, or select from the

manufacturer list to enable file format and grooming. Added direct support for

Vantage Media servers with cddbinfo.txt file output.