Fs storage system assembly instructions #2, Malone – Malone MPG331 User Manual
Page 2
Installation & Loading Instructions - FS Storage Rack
TM
MALONE
R
4
. Vertically position a lower side assembly and
install two Cross Supports with nuts / washers
provided. Repeat for the opposite side.
See image 5.
NOTE: Lightly tighten the lock nuts at this stage.
. Position and install a third Cross Support as shown.
Firmly tighten all six Cross Support lock nuts with
a 1/2” wrench. See image 6.
. Identify and pre-stage two Cross Supports (E) with
lower side assemblies completed in instructions 2
and 3.
See image 4.
NOTE: The images provided show the frame with
the optional Leg Extension included. Ignore if not
applicable.
6
5
7
. Insert Coupling (F) over the top of a Lower
Upright. Align lower mounting holes and
install two 45mm Bolts (I) with washer and
lock nuts. Hand tighten only.
Repeat for second Coupling and Upright.
See image 7.
E
E