Malone MPG353 - Manual (Page 4)

. Place the straps parallel to the carriers
with the front strap loop on the windshield
and the rear strap loop on the back of the
vehicle. See image 14.
Step 3: Loading the Kayak
. Route the free end of a 12’ Load Strap down through
the top of the outer most strap slot and back up
through the inside slot of the carrier. Pull the free
end until there is an even loop. Repeat for the
second carrier. See image 13.
. Re-insert the two rubber plugs into the two
top side hex holes of the rear carrier.
See image 12.
11
MALONE
R
12
14
. Confirm the carriers are in alignment. Confirm that
the mounting bolts are tight and both carriers are
securely fixed to the cross bars. See image 11.
13
TM Installation & Loading Instructions - MPG350 Stinger