Malone MPG152 - Manual (Page 2)

4
Step 2: Loading the Kayak
. Confirm that the bottom of the Blocks and
the roof of the vehicle are clean and free of
any dust or dirt that could scratch the finish.
Place the kayak with Blocks onto the vehicle.
For installation without cross bars, center the
kayak on the roof and confirm that the weight
is evenly distributed. See image 4.
Note: Do not place Blocks on sun roof.
For installation with cross bars, the Blocks
should be fitted onto the cross bars with the
bottom cut-outs fully inserted over each bar.
MALONE
R
Installation & Loading Instructions - MPG152 Deluxe Kayak Kit
. Unroll the green 15’ Load Straps. Open
the vehicle’s doors. Throw the non-buckle
ends of each Strap up and over the kayak
and down to the other side of the vehicle.
The Straps and the Blocks should be as
closely aligned as possible. See image 5.
. With the doors open, pull both ends of the
straps together and buckle from the inside
of the vehicle. Confirm the straps are tight
and secure. See image 6.
5
6