Longshine LCS-K916 - Manual (Page 6)

5
4.1. Front View
8-Port
Figure 1: 8-port KVM front view
16-Port
Figure 2: 16-port KVM front view
LED Indicators:
．Selected:
RED LED indicates that the KVM Switch is selected to the corresponding PC.
．On-Line:
GREEN LED indicates that the KVM Switch is ready to the corresponding PC.
Reset Switch :
Press Reset switch when you want to reset the system. This switch must be pushed with a thin object like
the end of a paper clip, or a ball point pen.
4.2. Rear View
8-Port
Figure 3: 8-port KVM read view
16-Port
Figure 4: 16-port KVM read view
4.3. Single stage installation
4.3.1. Precaution
Please turn off computers and devices when you start to install KVM Switch.
For computers with Keyboard Power On function, please unplug the power cords in advance.
Otherwise, the switch might not work properly.
If your computeres work under Windows 98, please connect KVM switch to computers via PS/2 ports,
because Windows 98 does not support installation at first time as through USB HID installation driver.
Some old computers must enable USB setting in BIOS in advance to make USB interface work.
This KVM switch does not support USB keyboard with USB HUB.
•
•
•
•
•
•
•
•
•
•
•