Longshine LCS-K916 - Manual (Page 16)

15
Figure 20: Menu Position Setup
Figure 21: Banner Position Setup
7.3.1. Scan Mode
Select:
Scan the selected channels marked with S in STA column on OSD main menu.
PC ON:
Scan all powered on PC channels
7.3.2. Scan Time
The default scan time is 5 seconds. It can be changed up to 90 seconds by stepping 5 seconds.
7.3.3. Banner Time
The default banner time is 5 seconds. It can be changed to 10 seconds, 15 seconds, or always on (∞).
7.3.4. Position
Menu
Use four arrow keys to move the OSD main menu to the desired position. Press to save the
changed menu position.
Banner
Use four arrow keys to move the channel banner to the desired position. Press to save the
changed banner position.
7.3.5. Hot key
Scroll Lock: becomes the hot key.
Num Lock: becomes the hot key.
Cap Lock: becomes the hot key.
Note: You can also change leading hot key via hot key by using < CTRL > →< CTRL >→< New Hotkey >
→< Enter > outside the OSD mode. Please refer section 6.2 Leading Hot Key Select.
7.3.6. Sound
ON: Buzzer sound enabled.
OFF: Buzzer sound disabled.
Note: You can also enable/disable buzzer sound via hot key by using
→→→ outside the OSD mode. Please refer section 6.5 Buzzer
sound Disable / Enable.
•
•
•
•
•
•
•