Longshine LCS-K916 - Manual (Page 11)

10
→→<1>→ or
→→<2>→ or
…
…
→→<16>→
Note: You can also select computers in OSD menu. Move the indicator bar to the chanel to switch by using
, or , then press to select the connected computer. Please refer
section 7.2 Channel Selection in OSD.
6.3.2. Arrow Key Channel Shift Function
Press twice, and press or key to shift left/right one channel.
Switch to left one channel
→→
Switch to right one channel
→→
6.3.3. Channel Shift Function
1.Start Channel shift Function
< ALT > channel shift function default was off. You can press Hot-Key twice, and then press
to turn on or turn off this function alternately.
2.Shift the channel by key
Press left < ALT > or right < ALT > key twice, the PC channel will automatically shift to left or right one channel
(channel decrease / increase to next) when < ALT > channel shift function is enabled.
Enable/Disable channel shift function
→→< ALT >→
Switch to left one channel
→< Left ALT >
Switch to right one channel
→< Right ALT >
6.4. Channel Select - Cascade Chain Layer
You can select the active channel directly under cascade chain connection.
The following hot key sequence is used for quick channel selection.
Press twice, , the cascade channel number (1,2,3……16), and Press .
Channel select to first layer
< Scroll Lock > →< Scroll Lock >→→< CH-L1 >→< Enter >
Channel select to second layer
< Scroll Lock > →< Scroll Lock >→ →< CH- L1 >
→ →< CH-L2 >→< Enter >
Channel select to third layer
< Scroll Lock > →< Scroll Lock >→→
→→< CH-L2 >
→→< CH-L3 >→< Enter >
•
•
•
•
•
•
•
•