Longshine LCS-K916 - Manual (Page 17)

16
Channel Name
Channel Number
Figure 22: Auto-Scan Banner
Indicate now is Scan Mode
Figure 23: Console Lock Banner
Figure 24: Unlock window
7.3.7. Language
English (En) / Deutsch (De) / Francais (Fr), 3 languages are available.
7.4. Auto-Scan in OSD:
7.4.1. Start to auto-scan in OSD
Press in OSD main menu. The auto-scan banner will be shown to indicate the scanning channel.
Note: You can also start auto-scan function via hot key by using
→→→ outside the OSD mode. Please refer section 6.6.1 Start
Auto-Scan Function.
7.4.2. Stop auto-scan
Press any key on keyboard to STOP the auto-scan function. The auto-scan banner will disappear when the
scan stops.
7.4.3. Auto-scan mode
There are two auto-scan modes, please refer section 7.3.1 Setup in OSD – Scan Mode to set up the auto-
scan mode.
Scan all computers which are power on.
Scan all computers which are marked for auto-scan.
7.4.4. Auto-scan time interval
The auto-scan time interval of each port displayed can be adjustable by pressing in OSD main
menu. Please refer section 7.3.2 Setup in OSD – Scan Time.
7.5. Console Lock in OSD:
If the security mode is enabled in OSD mode (by pressing in OSD mode, please refer section 7.7
Security Setup in OSD). You can logout to lock console by pressing In OSD mode. The Console
Lock Banner will be shown on the screen.
The KVM will be locked until an authorized user login.
Note: You can also logout to lock console via hot key by using
•
•