Longshine LCS-K916 - Manual (Page 19)

18
Figure 28: Administrator password
setup window
Figure 29: User name password setup
window
Figure 30: User authority setup window
7.7.2. Security Mode
To change the security mode setting, please move the highlight bar to Security Mode, and press arrow> or key to change it. The Console Lock, Port Lock and user authority
functions can not be executed until the security mode is enabled.
7.7.3. Change administrator password
To change the administrator password, move the highlight bar to Admin/password, and press arrow> or key. The administrator password setup window will be shown on the screen.
Input the new password twice and press to confirm, or press to exit.
7.7.4. Authorized user setup
3 authorized users are admitted to manage the KVM switch. To change the user name and password,
please move the highlight bar to the user for editing. Press or key, the user
name and password setup window will be shown on the screen. Please Input the new user’s name and
password twice, then press to confirm or to cancel.
7.7.5. User Authority setup
You can setup the authority for each user. Different user has different access right for each channel. To
change the access right of each channel for certain user, please move the highlight bar to the channel,
and press , <1>, <2> or <3> to setup the channel access right for all or certain user. You don’t have
to setup the authority of administrator since the administrator has all channel access right.