Longshine LCS-K916 - Manual (Page 10)

9
Figure 12: Specific channel
selection hot key
5. Operation
You can control computers via 8-Port or 16-Port Combo Free KVM Switch by push button, hot key and OSD.
1.Push button operation
Press the front panel push button to select the PC and operate it.
2.Hot Key operation
Please refer section 6. Hot Key Operation.
3.OSD operation
Please refer section 7. OSD Operation.
6. Hot Key Operation
6.1. Call OSD Menu
Press < Scroll Lock> twice and , then the OSD “Main Menu” will be displayed on the monitor screen.
All of the KVM parameters can be setup in OSD mode. You can also execute some KVM functions in OSD.
→ →
6.2. Leading Hot Key Select
The two-steps hot key sequence is used for quick function execution.
The leading key is by default. However, you can change the leading hot key if you want.
By pressing twice, , then press , you can change the leading hot key.
The available leading hot key are , < Num Lock > or < Caps Lock > for option.
Setup leading hot key to < Scroll Lock >
< CTRL > →< CTRL >→< Scroll Lock >→< Enter >
Setup leading hot key to < Num Lock>
< CTRL > →< CTRL >→< Num Lock >→< Enter >
Setup leading hot key to < Caps Lock >
< CTRL > →< CTRL >→< Caps Lock >→< Enter >
Note: You can also change leading hot key by pressing in OSD main menu. Please refer section 7.3.5
Setup in OSD – Hot Key.
6.3. Channel Select - Single KVM
6.3.1. Specific channel selection
You can select the connected computers by using the two-step Hot Key sequence. Press key
twice (Step 1), then press key (1 to 16) and (step 2) to select the computer you want to control.
•
•
•