Longshine GFT150 Ver.1.0 - Manual (Page 53)

PS960GLE/ PS965GME Mainboard
49
2.3.11 Set Password
Set change or disable password. It allows you to limit access to the system and/or BIOS setup.
Useing Password to set a password that will be used exclusively on the system. To specify a
password, highlight the type you want and press .
The Enter Password: message prompts on the screen. Type the password, up to eight characters
in length, and press . And the system confirms your password by asking you to type it
again. After setting a password, the screen automatically returns to the main screen.
To disable a password, just press the key when you are prompted to enter the password.
A message will confirm the password to be disabled. Once the password is disabled, the system
will boot, then you can enter BIOS Setup freely.