Longshine GFT150 Ver.1.0 - Manual (Page 23)

PS960GLE/ PS965GME Mainboard
19
1.4.30 DDRII1/ DDRII2: Memory Installation
The PS960GLE/ PS965GME provides the DDR II SO-DIMM socket which allows you to install
200-pin SO-DIMM.
Memory Installation Steps
1. Match the notch on the bottom of the DIMM module with the corresponding pattern in the
DIMM slot. This will ensure that the module will be inserted with the proper orientation.
Now the chips or pins at the bottom of the DIMM module are still visible.
2. Lower the DIMM module into the DIMM Slot until the chips or pins at the bottom of the
DIMM module are hidden.
3. Press the DIMM module backward firmly using both thumbs until the module snaps into
place. Do not use excessive force.
4. Repeat steps 1, 2 & 3 for the remaining DIMM slots.
＊ The pictures above are for reference only. Your actual installation may vary
slightly from the pictures.。