Chapter 1 getting started, 1 introduction – Longshine GFT150 Ver.1.0 User Manual
Page 5
PS960GLE/ PS965GME Mainboard
1
Chapter 1 Getting Started
1.1 Introduction
Thanks for choosing PS960GLE/ PS965GME Mainboard. It is based on Intel
®
960GLE/ 965GME
Northbridge chipset and Intel
®
ICH 8M/ M-E(optional) Southbridge chipset. In addition, it also supports
integrated Intel
®
960GLE/ 965GME Graphics Engine for onboard graphics feature. It supports Intel
®
Celeron
®
processor by 960GLE; supports Intel
®
Core™ 2 Duo Mobile & Penryn processor by
965GME.
The PS960GLE/ PS965GME provide 2 DDR II SO-DIMM sockets which allow you to install 200-pin
DDR II 533(PS960GLE) or 667(PS965GME)MHz SO-DIMM. It supports a total memory capacity of
2(PS960GLE) or 4(PS965GME) GB.
This mainboard provides one MINI-IDE connector for MINI-IDE hard drives, supporting Ultra ATA
100/66/33MHz. and support 3 SATA II (300MB/s). In addition, Mini PCI & CF II slot for use with
standard expansion card is also allowed.
The PS960GLE/ PS965GME provide one VGA (D-Sub) connector, 8 USB 2.0/ 1.1 and 6 RS232 ports
for use. There are maximal 8 USB2.0/ 1.1 ports which can be set up on this mainboard.
This mainboard also comes with one onboard 10/100/1000 Mbps Ethernet LAN chips (RTL8111C). On
the back panel of your case that you can directly plug into Internet cables.
The onboard Realtek
®
ALC 662 AC’97 Codec supports high quality performance.