LABEC M-TIT-5 - Manual (Page 42)

10.2 Set System Time
In starting status, press ‘Set’ button in menu, select ‘System Time’ and press ‘Enter’ to set date,
time of the meter.
Diag. 54 Display of System Time
View Titrate Mode Set Calibrate
Titration Panel READY + K 10/21
Feed
Clean
Titrate
58
29
22
10
09
2003
2003/10/29
09:22:58
Set System Time
In Diag.54 , top left corner in Set System Time window displays current time and date of the meter
and six buttons on the bottom of left corner are in corresponding to year, month, day, hour, minute
and second. If user needs to amend month, you could press ‘Month’ button, meter will display
month and stop counting time, beside the button, there are ‘Input’ and ‘set’ button, display as
follows:
View Titrate Mode Set Calibrate
Titration Panel READY + K 10/21
Feed
Clean
Titrate
11
Input
Set
58
29
22 09
2003
2003/10/29
09:22:58
Set System Time
Diag. 55 Set System Time
Press ‘Month’ button could increase the month, or user could press ‘Input’ button to key-in the
month directly. When input finished, press ‘Set’ is all right. User could set the other time according
to the same procedure.
41