LABEC M-TIT-5 - Manual (Page 39)

9.2.1 The Mode’s Save As
For the research or some other purpose, the mode can be copied and generate another mode.
In viewing mode, press ‘Save As’ button, the meter displays ‘Save As Current Mode’?
Displayed as following Diag.49, press ‘Enter’ button, amend or key-in new name of the mode,
meter will automatically copy current mode.
Diag.49 The mode’ save as
Select Mode 01/02
03 HC1 ---﹥
NaOH(0.1)
04 K2Cr207 ---﹥
Fe2+(0.1)
Mode HC1 → NaOH (0.1)
Ph titration
Number of end point: 1
2003/06/15 00:00:00
First end point sample volume
10.0mL
End point: 7.00pH
Concentration
Time delay:
10s of Titrant
End point switch: ON 0.1000
Exit Enter
Save as Current Mode?
PgDn PgUp
Save as Delete Titrate Stir Calibrate
9.2.2 Delete of Mode
If user finds a certain mode useless, you could select deleting of this mode. In viewing mode,
pressing ‘Delete’ button, the meter will display ‘Delete Current Mode’?, press ‘Enter’ button
to delete this mode. Displayed as follows:
Diag.50 Delete of Mode
Diag.50 Delete of Mode
Select Mode 01/02
05 HC1 ---﹥
NaOH 0 .1) (
06 K2Cr207 ---﹥
Fe2+(0.1)
Mode HC1 → NaOH (0.1)
PH titration
Number of end point: 1
2003/06/15 00:00:00
sample volume
10.0mL
End point: 7.00pH
Time delay:
10s Concentration
of Titrant
End point switch: ON 0.1000
Exit Enter
Delete Current Mode?
PgDn PgUp
Save as Delete Titrate Stir Calibrate
38