LABEC M-TIT-5 - Manual (Page 41)

When setting finished, meter will return to starting status. See following Diag.52 for setting of each
parameter.
View Titrate Mode Set Calibrate
Titration Panel READY + K 10/21
Feed
Clean
Titrate
Set
Stirring Speed
System Time
Printer
Burette
Exit
Enter
Diag.52 Set Parameter of the meter
10.1 Set Speed of Stirring
In starting status, press ‘Set’ button in menu, select ‘Stirring Speed’ and press ‘Enter’ button to
set the stirring speed of stirrer.
View Titrate Mode Set Calibrate
Titration Panel READY + K 10/21
Feed
Clean
Titrate
Stop
Set Stirring Speed
Stirring Speed : 40
…………………………………………………
Diag. 53 Set stirring speed in starting status
In setting window, ‘Start’ (or ‘Stop’) button is used to start (or close) stirrer, sliding bar and
displayed stirring speed is in corresponding to the actual speed value of current stirrer, user could
press sliding bar directly or press ‘﹤’, ‘﹥’ to set the speed of stirrer. When setting finished, press
‘Close’ button on top right corner to return to starting status.
40