LABEC M-TIT-5 - Manual (Page 37)

Print About
Diag. 46 Display for Viewing Stored Data
The same as the ‘Print’ function in viewing current titration data, user is allowed to select ‘Print
Titration Result’, ‘Print Titration Data’ or ‘Print Titration Curve’, press ‘Print’ button in menu and
select needed operation and print them out.
The same as the ‘About’ function in viewing current titration data, user is allowed to view titration
name, titration time, burette, burette coefficient and electrode slope of current titration.
9. Mode
Meter provides two modes function: one is generate mode function, the other is view and edit
mode parameter function. In starting status, press ‘Mode’ button in menu and select generation
mode or viewing mode
Diag. 47 Function of Mode
View Titrate Mode Set Calibrate
Titration Panel READY + K 10/21
Feed
Clean
Titrate
Exit
Mode
Generation of Mode
Viewing Mode
Enter
36