LABEC AA-22N - Manual (Page 6)

Operation manual
SEA Series Steam Sterilizers
2
2.Specifications
Figures
Caution & Warning
Type B Device
Grounding
Test Cycle Key
Used Water Outlet
Cycle Step Key
Package Key
Start/Stop key
Select Key
Dry Key
Standard atmospheric pressure: It is the atmospheric pressure at sea level. It refers to 1 Standard atmospheric
pressure.
The value is 0.1Mpa=1000Hpa=1.0 Bar. Atmospheric pressure decreases by higher altitude.
For instance: at 3000 meters or lower, An increase of altitude of 1000 meters will result in a decrease of
ATM PR .by 0.1Bar approximately.
Tip:
Chamber inner dimensions: (Diameter x Depth) ---------------------------
Power Supply: -------------------------------------------------------------According to the nameplate
Sterilizing Temperature/Pressure --121
/(1.0-1.3) Bar (Under standard atmospheric pressure)
------------------------------------------134 /(2.0-2.4) Bar(Under standard Atmospheric pressure)
22L:247mm x 450mm
Note: Temperature/Pressure here means the chamber temperature and pressure during the phase
of sterilization. The value varies under different atmospheric pressure.
Power Fuse -----------------------------------------------------------------
Water reservoir capacity -----------------------------------------------------------------------3.5 liters T15A 22L T12A 17L
Environment temperature---------------------------------------------------------------+5 +40
Relative Humidity Range------------------------------------------------------------------30% 75%
17L:247mm x 355mm