KGUARD Security BR1611P - Manual (Page 63)

ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
63
Load Default Settings
Use this feature to restore the factory default settings of the DVR.
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > ADVANCED.
3
Click Load Default.
4
Check the check box of the settings that you want to restore.
« TIP »
• To restore all settings, click Select All.
• To deselect all checked boxes, click Clear.
• To cancel, click Cancel.
5
After all settings are complete, click Apply.
6
A warning message appears, click OK to confirm.
7
When data saving is complete, click OK.
4.8.2 Events Settings
The Events page allows you to define the type of events for the DVR to issue an alarm.
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > ADVANCED, select the Events tab.