KERN & SOHN HFM 10T1 - Manual (Page 23)

7. Adjustment
Ö Switch-off balance and attach a carrying help if necessary.
Ö Switch-on balance with attached carrying help and during the selftest press the
ZERO and the button at the same time. „P1 - - - “is displayed.
Ö Use the number keys to enter password:
or
select standard password „0000“ with HOLD number, increase the flashing
number using
or
personal password, see function F8 ci
Ö Confirm with ZERO button, the first function „F0 di“ is displayed.
Ö Press the button repeatedly until „F9 CAL“ will be displayed.
Ö Press the ZERO button, „UnLD“ will be displayed.
Ö Unload the balance and wait until the LED lights up.
Ö Press the ZERO button, the currently set adjustment weight is displayed.
Ö In order to change, select the number to be changed using the HOLD button and
set the desired value using the button, the respective active digit
flashes.
Ö Confirm by the ZERO button, „Load“ will be displayed.
Ö Attach the adjustment weight and wait until the LED lights up.
Ö Press the ZERO button.
Ö After successful adjustment the balance carries out a selftest, then it
automatically returns to weighing mode.
An adjusting error or incorrect adjusting weight will be indicated by the error
message; repeat adjustment procedure
HFM-BA-e-1011 23