KERN & SOHN HFM 10T1 - Manual (Page 12)

4. Commissioning
Attention: Always observe chapter 2 „General Safety Instructions“!
4.1 Unpacking
Once delivered and unpacked, crane scales will not be
taken back.
The crane scales have been sealed by Messrs. KERN.
Ö Shackles and hooks are sealed by Sella tape.
Ö The packaging is also sealed by adhesive tape.
+
Broken seal obliges to purchase.
SAFETY
INSTRUCTIONS
for protection against
break
Thanks for your comprehension.
Your KERN Quality assurance team
CAUTION
Danger for the back!
The crane scales are compact and quite heavy.
Ö Remove the scales from packaging only with the help of
a second person.
Ö Use a lifting device such as a crane or a forklift truck.
Ö Secure the scales that they cannot fall down when they
are lifted.
Ö Make sure that all parts are completely present.
• Crane scales
• Mains adapter
• Remote control
• Operating instructions (logbook)
Only use original packaging for returning.
4.2 Checking the original dimensions
Ö Enter the original dimensions of the product datasheet into the grey fields of the
checklist chap. 9.3.
Ö Realisation of all safety checks, see chapter 9.2 „Regular maintenance after three
months“
Ö Enter all data (date, tester, results) in the first line under „Inspection before first
use“ in the checklist (see chapter 9.3)
CAUTION
If the dimensions of your first safety inspection do not match those
of KERN, the balance must not be put into operation. In this case
please contact a service partner authorised by Messrs. KERN.
HFM-BA-e-1011 12