KERN & SOHN HFM 10T1 - Manual (Page 15)

5. Operation
5.1 Safety instructions
DANGER
Risk of injury due to falling loads!
Ö Always work with particular care according to the general
rules for crane operation.
Ö Check all parts (hook, eyelet, rings, rope slings, cables,
chains etc.) for excessive wear or damage
Ö If faults can be seen on the safety bracket of the hook
or if it is missing completely, the scales must not be
used.
Ö Work only with appropriate speed.
Ö Always avoid vibrations and horizontal forces. Avoid
any kind of shock, torsion and oscillating (e.g. caused
by inclined suspending).
Ö Do not use the crane scales for transport of loads
Ö Do not stand or go under suspended loads.
Ö Do not use on building sites.
Ö Suspended loads have to be observed constantly.
(Example)
Ö Do not exceed the nominal load of crane, crane scales
or any kind of load attachment devices at the crane
scales.
HFM-BA-e-1011 15