KERN & SOHN HFM 10T1 - Manual (Page 20)

5.5 Taring
Ö Suspend preload.
Press the ZERO button. In the display appears 0 (kg) and the LED a lights
up. The weight of the container is now internally saved.
Ö Weigh the material, the net weight will be indicated.
Ö After removing the preload weight appears as negative display.
Ö To delete the tare value, remove load from crane scales and press the ZERO
button.
5.6 Weighing
Ö Load the crane scales.
The weight value will be displayed at once. After standstill control the LED
lights up.
Overload warning
Overloading exceeding the stated maximum load (max) of the balance, minus
a possibly existing tare load, must be strictly avoided. This could cause
damage to the balance.
Exceeding the maximum load is indicated by the display „--ol-“. Unload
balance or reduce preload.
5.7 Record weight value (freeze)
Ö Press the HOLD button to „freeze“ or to record the current weight value.
It remains displayed until it is deleted. The LED HOLD lights up
Ö In order to delete the "frozen" or the recorded weight, press the HOLD button.
The LED HOLD extinguishes.
HFM-BA-e-1011 20