KERN & SOHN AEJ 200-4CM - Manual (Page 63)

• Selecting reference quantity
First go to the menu and select the setting ACAI:
P2.3 – Select QUANTITY, press F2, P2.3.1 – READING will be displayed;
Repeatedly press F2 until ACAI YES is displayed.
If NO is displayed: Press F2 and use the arrow keys to set YES, then confirm by
pressing PRINT.
The last selected setting will be shown.
Place the reference weight on the pan
and confirm by pressing PRINT.
The weight as well as the number of
pieces matching this weight will be
displayed.
Remove reference weight. The balance is now in parts counting mode and counts all
units on the weighing plate.
AEJ-C/AES-C/PLJ-C-BA-e-1412 63