KERN & SOHN AEJ 200-4CM - Manual (Page 60)

• Set operating mode PIECE COUNTING
The ENTER REFERENCE WEIGHT function is allocated to the F1-key.
4x
The previous setting will be displayed.
(example)
The previous setting for the F1-key will
be flashing.
Use the arrow keys to select ENTER
REFERENCE WEIGHT.
This completes the allocation of the
function used to enter the reference
weight to the F1-key.
In piece counting mode this enables you to invoke the function used to enter the
reference weight by pressing F1.
60 AEJ-C/AES-C/PLJ-C-BA-e-1412