KERN & SOHN DLT 100-3N - Manual (Page 10)

10 DLT_N-BA-e-1421
4 Basic Safety Precautions
4.1 Pay attention to the instructions in the Operation Manual
 Carefully read this operation manual before setup and
commissioning, even if you are already familiar with KERN balances.
 All language versions contain a non-binding translation.
The original German is binding.
4.2 Personnel training
The instrument may only be operated and maintained by trained personnel.
4.3 Danger Information
WARNING
! The moisture analyser is used to analyse the moisture content of materials.
This instrument must be used exclusively for this purpose. Any other usage
may cause a risk to personnel, damage to the instrument or other material
damage.
! The moisture analyser should be used mainly for the drying of aqueous
substances.
! The moisture analyser may not be used in a hazardous area.
! The instrument may only be operated and maintained by trained personnel.
! Carefully read this operation manual before setup and commissioning, even if
you are already familiar with KERN instruments.
Hazards during and after measuring
! Ensure correct installation of all components, see chap. 6.2
! Careful when removing the sample. The sample itself, the sample dish and the
heating unit may be very hot.
! Use the sample retainer at all times as it allows safe working and prevents
burns.
! Individual parts of the case (e. g. the ventilation grids) may heat up
considerably during operation. Therefore, only take hold of the instrument by
the marked handles.