Keri Systems EP1501 - Manual (Page 2)

Mercury Security © 2014 EP1501 DOC 10107-0036 REV 1.07 Page 2
3. EP1501 Wiring and Setup:
EP1501 CONNECTIONS
TB1-1 IN1 Input 1
TB1-2 IN1
TB1-3 IN2 Input 2
TB1-4 IN2
TB2-1 VO Reader 1 Power Output – 12 Vdc
TB2-2 LED Reader 1 LED Output
TB2-3 BZR Reader 1 Buzzer Output
TB2-4 CLK Reader 1 CLK/Data 1/TR+
TB2-5 DAT Reader 1 DAT/Data 0/TR-
TB2-6 GND Reader 1 Ground
TB3-1 LED Reader 2 LED Output
TB3-2 BZR Reader 2 Buzzer Output
TB3-3 CLK Reader 2 CLK/Data 1 Input
TB3-4 DAT Reader 2 DAT/Data 0 Input
TB4-1 VO Auxiliary Power Output – 12 Vdc
TB4-2 GND Auxiliary Power Output Ground
TB4-3 VIN Input Power – 12 Vdc (from local power supply)
TB4-4 GND Input Power Ground
TB5-1 NO Relay K1 – Normally Open Contact
TB5-2 1-C Relay K1 – Common Contact
TB5-3 NC Relay K1 – Normally Closed Contact
TB5-4 NO Relay K2 – Normally Open Contact
TB5-5 2-C Relay K2 – Common Contact
TB5-6 NC Relay K2 – Normally Closed Contact
Jumpers:
JUMPERS SET AT DESCRIPTION
J1 N/A Factory Use Only
J2 N/A Factory Use Only
J3 PoE EP1501 powered from the Ethernet connection
12V EP1501 powered from an local 12 Vdc power source
connected to TB4-3 (VIN), TB4-4 (GND)
J4 N/A Factory Use Only
J5 N/A Factory Use Only
J6 N/A 10-Base-T/100Base-TX Ethernet Connection
J7 Cabinet Tamper Switch Input: short = tamper secure