Displaying pro-2`s software version – Kenton Pro-2 User Manual
Page 16

_________________________________________________________________
Displaying PRO-2`s software version
_________________________________________________________________
To see what software version the PRO-2 has, hold down the INC & DEC buttons whilst powering up the
PRO-2.
The PRO-2 will then display it`s software version & software build number, then return to normal
operation.
First it will display `40`, then `31`, `00`, finally `71`.
This means `software version 4031, build number 0071,` (current version when this is being typed).
___________________________________________________________
The Kenton Electronics PRO-2 CV converter has a built in mains transformer factory set to 240 volts AC
50Hz unless otherwise marked. The transformer also has a tapping for 220 volts AC, but this adjustment
must only be made by qualified service personnel. A different transformer must be fitted for operation
from 120 volts. An internal fuse of rating 100mA is fitted, but replacement of this should also be
confined to qualified service personnel. (If fitted with A 120v transformer, a 250mA fuse must be used).
WARRANTY
The PRO-2 comes with a 12 month (from purchase date) back to base warranty, (i.e. customer must
arrange and pay for carriage to and from Kenton Electronics
12 Tolworth Rise South, Surbiton, Surrey, KT5 9NN, UK.
Tel: +44 181 337 0333 Fax: +44 181 330 1060
e-mail - [email protected]
www - http.//www.kenton.co.uk/
e. & o. e.
August 1996 a. d.