Kenton Pro-2 - Manual (Page 11)

_________________________________________________________________
CONNECTING YOUR MODIFIED TB303 (5 SOCKET RETRO) TO THE
PRO-2
_________________________________________________________________
PRO-2 to TB303
CV CHANNEL A > CV IN
GATE CHANNEL A > GATE IN
AUX1 CHANNEL A > FILTER
AUX2 CHANNEL A > SLIDE
AUX2 CHANNEL B > ACCENT
Set the AUX sources to which ever MIDI controller you wish to control the Filter, Accent or Slide.
If you use AUX2 (or 1) on Channel B to control the Filter, Accent or Slide, remember to send MIDI
controller messages on the MIDI channel channel B is set to receive on to affect the TB303.
Using Slide;
The Channel A AUX2 trimmer on the front panel of the PRO-2 should be set to minimum (fully anti-
clockwise) and the OFFSET set to zero. To turn the SLIDE on/off, the MIDI controller must be set to 65 for
on, and 0 for off. When the slide is on, all following notes will glide into each other. It is best to play
legato style for good results.
Using Accent;
The Channel B AUX2 trimmer on the front panel of the PRO-2 should be set to minimum (fully anti-
clockwise) and the OFFSET set to zero. To turn the ACCENT on/off, the MIDI controller must be set to
65 for on, and 0 for off.