LG G3 - Manual (Page 136)

Tools and Calendar 127
Pair Your Phone
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap the check box next to your device name to make your
phone visible. Your phone must be visible to successfully pair with an external device. If you want
to search a new device, you also need to make that device visible.(See the instruction manual
from the manufacturer.)
3. Tap Search for devices. (Your phone will display a list of discovered in-range Bluetooth
devices.)
4. Tap a device from the list to initiate pairing.
5. Depending on the device, you might have to tap Pair to accept the passkey (if they match),
confirm matching passkeys, or enter the passkey or PIN Code.
6. Tap Done > OK if you entered a passkey or PIN code.
7. The external device will then have to accept the connection and enter your phone’s PIN code.
Note: Due to different specifications and features of other Bluetooth-compatible phones, display and
operations may be different, and functions such as transfer or exchange may not be possible with all
Bluetooth compatible phones.
Pairing between two Bluetooth phones is a one-time process. Once a pairing has been created, the
phones will continue to recognize their partnership and exchange information without having to re-
enter a passcode again.
Disconnect a Paired Phone
Disconnecting a paired device breaks the connection between the device and your phone, but
retains the pairing. At a later point when you wish to reconnect the device, there is no need to setup
the connection information again.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap next to the previously paired device (under the
PAIRED DEVICE section).
3. Tap Unpair.
Note: Disconnections are manually done but often occur automatically if the paired device goes out
of range of your phone or if it is powered off.
Send Items via Bluetooth
Depending on your paired phone's settings and capabilities, you may be able to send pictures,
videos, Contacts information, or other items using a Bluetooth connection.