Canon A2100 IS - Manual (Page 92)

92
You can automatically play back images recorded to a memory card. Each
image displays for approximately 3 seconds.
Select [Slideshow].
● Press the n button and select the 1
tab, then select [Slideshow] and press the
m button.
Select a transition effect and start
the slideshow.
● Press the qr buttons to select a transition
effect, then press the m button.
X The slideshow will start a few seconds
after [Loading image…] displays.
● You can pause/restart a slideshow by
pressing the
m button again.
● Press the n button to stop the
slideshow.
. Viewing Slideshows
Switches between images without transition effect.
Fades one image out and the next in.
The image slides out to the left and the next image appears.
• If you press the qr buttons during playback, the image will switch. If you
press and hold down the qr buttons you can fast-forward through
images.
• The power saving function does not work during slideshows (p. 41) .