Changing functions, P. 106), Display off – Canon A2100 IS User Manual

Page 106: Turning off the start-up image, Turning off the power saving function, Setting the screen shut-off time

106

You can customize convenient and commonly used functions from the

tab

Turning Off the Start-up Image

You can turn off the start-up image that displays when you turn on the
camera.

●

Select [Start-up Image], then press the

buttons to select [Off].

Turning off the Power Saving Function

You can set the power saving function

to [Off]. Setting it to [On] is

recommended to save battery power.

●

Select [Power Saving], then press the

button.

●

Press the

op buttons to select [Auto Power

Down], then use the

qr buttons to select [Off].

●

If you set the Power Saving function to [Off],
be careful not to forget to turn off the camera
after use.

Setting the Screen Shut-Off Time

You can adjust the time the screen takes to shut off automatically

This also works when [Auto Power Down] is set to [Off].

●

Select [Power Saving], then press the

button.

●

Press the

op buttons to select [Display Off],

then use the

qr buttons to select a time.

●

In order to save battery power, it is
recommended to select less than [1 min.].

Changing Functions