Changing shooting functions, P. 109), Turning off the af assist beam – Canon A2100 IS User Manual

Page 109: Turning off the red-eye reduction function

109

If you set the mode dial to

G, you can change the settings in the 4 tab

Turning off the AF Assist Beam

If the camera cannot focus in low light conditions when you press the shutter
button halfway, the lamp will automatically light to assist focusing. You can
turn off the lamp.

●

Select [AF-assist Beam], then press the

buttons to select [Off].

Turning off the Red-Eye Reduction Function

The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.

●

Select [Flash Settings], then press the

button.

●

Press the

op buttons to select [Red-Eye

Lamp], then press the

qr buttons to select

[Off].

Before attempting to shoot using a function explained in this chapter in
modes other than

G mode, check if the function is available in those

modes

(pp. 122

–

123)

Changing Shooting Functions