Compaq S0000 / 8000 - Manual (Page 114)

upgrading and servicing the pc 107
reassembling the pc
1 Replace the front bezel by following the method appropriate for your PC
model.
•
To replace the front bezel on the S0000 series, position the chassis in the
upright position. At an angle, align the top of the front bezel with the top
slots of the chassis (1) so that the front bezel hooks onto the chassis, and
then press the bottom end of the bezel to the chassis until it snaps into
place (2).
1
2
replacing the front bezel on the S0000 series
•
To replace the front bezel on the 8000 series, lay the chassis on the side with
the open side up. Place the front bezel in the correct position. Ensure the
slots (2) are aligned correctly, and rotate the bezel toward the chassis (1)
until it snaps into place.
replacing the front bezel on the 8000 series