Compaq S0000 / 8000 - Manual (Page 102)

upgrading and servicing the pc 95
locating drive positions
drive positions on the S0000/8000 series (S0000 shown)
removing a drive
1 Locate the drive you want to remove.
2 Complete the procedure described in “preparing the pc“ on page 91.
3 Disconnect the power cable (1) and data cable (2) from the back of the drive
you want to remove, as indicated in the following illustrations. Use a gentle
rocking motion. Some units may have a sound cable. If so, disconnect the
sound cable (3).
disconnecting the optical drive cables
1 Optical drive, may be
a CD-ROM, CD-RW,
DVD-ROM, or
DVD+RW/+R drive
2 Second optical drive,
may be a DVD-ROM,
DVD+RW/+R, CD-
ROM, CD-RW drive,
or 7-In-1 memory
card reader (select
models only)
3 Diskette (floppy) drive
4 Hard disk drive