Compaq S0000 / 8000 - Manual (Page 100)

upgrading and servicing the pc 93
WARNING: Beware of sharp edges inside the chassis.
removing the pc access panel on the 8000 series
8 Remove the front bezel by following the appropriate method for your PC
model:
•
To remove the front bezel from the S0000 series model, gently pry the top
section (1) of the bezel away from the chassis. On the inside of the front
bezel, press the center two tabs (not the bottom tabs) to release the bezel,
and then pull it from the chassis (2).
removing the front bezel from the S0000 series