Audio- and video equipment keys, Record with your recorder, Audio and video equipment buttons – Philips 30PF9946-37 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Audio- and video equipment keys }
Most of the audio and video equipment from our range of products can be
operated with the remote control of your TV.
Press one of the buttons after you pressed the Select button repeatedly
according to the equipment you want to operate with this remote control.
See Use of the remote control, p. 5.
0
to switch to standby (VCR)
►M
for pause (DVD, CD)
#
for record,
for rewind (VCR, CD);
search down (DVD, AMP)
■
for stop,
►
for play,
for fast forward (VCR, CD);
search up (DVD/AMP)
fi+l
display information
MENU to switch the menu on or
off
- CH + for chapter, channel, track
selection
Notes:
- If no action is being undertaken within 60 seconds, the remote control returns to
TV mode.
- After an action in the selected system mode, the remote control will remain in
this mode for 60 seconds and will then return to TV mode or press the Select
button to return to TV mode immediately.
0 to 9 digit entry,
P^P tape index (VCR),
select a DVD chapter,
select a frequency (AMP)
(D VCR timer
XX surround on/off (AMP, CD)
cursor up/down
to select the next or the
previous disc (CD)
cursor left/right
to select the previous or
following track (CD)
^ Record with your recorder ^
To record S-VHS quality, connect an S-VHS
peripheral directly to the recorder.
Record a TV program
You can record a TV program using your recorders
tuner without affecting your TV.
O Select the channel number on your recorder.
0 Set your recorder to record.
See the handbook for your recorder.
Switching channel numbers on your TV does not
disturb recording!
Record a recorder from MONITOR OUT
You can record a program on your recorder from
the TV tuner via MONITOR OUT.
0 Switch on the device.
0 Select the correct channel on your TV and the
correct input on your recorder.
0 Set your recorder to record.
You record the tuner channel of the TV, even
when you switch to an AV input using the -O
button on the remote control.
Do not switch channels or turn off your TV when
you are recording through MONITOR OUT.
Note: When a TV channel or AV source is blocked
because of a rating set via the Channels menu (see
p. 12), also the record output picture and sound are
muted.
19