To select connected devices, Selecting connected devices, Front connections – Philips 30PF9946-37 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Front connections
Camera or Camcorder
O Connect your camera or camcorder as shown.
e
Connect to VIDEO
@
and AUDIO L
@
for mono
equipment. For stereo equipment also connect AUDIO R (|).
S-VHS quality with an S-VHS camcorder is obtained by
connecting the S-VHS cables with the S-video input © and
audio inputs (D.
Do not connect cable @ and @ at the same time. This may cause
picture distortion !
Headphone
O Insert the plug into the headphone socket as shown.
0 Press on the remote control to switch off the internal
loudspeakers of the TV.
The headphone impedance must be between 8 and 4000 Ohm. The
headphone socket has a 3.5 mm stereo jack.
In the Sound menu select Headphone volume to adjust the
headphone volume.
To select connected devices
0 Press the -Q button repeatedly or select Source in the
Settings menu (see p. 7) to select AVI, AV2, AV3, AV4, FRONT,
DVI or TV channels, according to where you connected your
devices.
0 Press the cursor up/down.
0 Press OK.
Remark: Most equipment (decoder, video recorder) carries out the
switching itself This is however never the case with a computer
connected to the DVI input
If you want to change to TV channels?
Enter the channel number of the TV channel which you want to
watch with the digit buttons.
18