Philips 30PF9946-37 - Manual (Page 17)

^ Connect Accessory Devices ^
There is a wide range of audio and video devices that can be connected to your TV. The following
connection diagrams show you how to connect them to the TV,
AVI IN can handle CVBS; AVI IN CVBS andYiCAVS IN CVBS; and AV4 INYPbPr480p, YPbPr 10801;
FRONT: CVBS and Y/C.
Recorder
( vcr - dvd + rw )
Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals out of the
display. Keep a minimum distance of 20" to the screen.
O Connect the RF Antenna or Cable TV
cable (eventually via an optional two-way
signal splitter and/or Cable TV converter
box) ^ to the RF IN socket of your
recorder.
e
Connect another RF cable @ from the
output OUT of your recorder to the
TV's input 75 Q nr jack.
Q Better playback quality can be obtained if
you also connect the Video, Audio Left
and Right (only for stereo devices) AV
cables ® to the VIDEO, AUDIO L and
R input jacks of AV2 IN.
If your recorder has an S-VHS video
jack:
For improved picture quality, connect an
S-video cable with the S-VIDEO input
instead of connecting the recorder to
the VIDEO jack of AV2 IN.
S-Video does not provide audio, so audio
cables must still be connected to provide
sound.
Recorder and other A/V devices
Recorder
O Connect your recorder as described
above d).
The MONITOR OUT connectors can be
used for daisy chaining or to record
programs from your TV @ ■
See Record with your recorder, p. 19.
Other A/V devices
e
Connect the Video, Audio left and Audio
right (only for stereo devices) cables to
the VIDEO, AUDIO L and R input jacks
of AVI IN (D or the front connections
(see p. 18).
Note: in case of mono equipment, only the
left loudspeaker reproduces sound. Use a
mono to stereo adapter (not supplied) for
sound reproduction via all internal
loudspeakers.
14