Philips 8P4841C199 - Manual (Page 42)

[!□!
How TO U se the P icture -I n -P icture
(PIP) F eature
P icture-in-Picture ( P I P ) is the
showing of two pictures on the
TV screen at the same time. (One
main screen picture and one small
inset picture - or P I P ) . For your
ease and convenience this TV has
two separate inputs (ANTenna A
and ANTenna B) for your home’s
Antenna and!or Cable TV system
signal.
The ANT A input is primarily for
the TV’s main screen picture. The
ANT B input is provided as a
second, dedicated source option
for the TV’s PIP '‘window” and its
feature operations. The signal
connected to the ANT B input can
be either a Split Signal Input (as
described in the section on this
page), or another type of external
signal source (such as a satellite
dish system, additional home
antenna, video accessory, etc.).
See the following steps on how
channels connected to the
ANT(enna) B Input can be shown
and used within the PIP window:
C begin I
Connect your Antenna or
Cable TV signal to the single 75
ohm INPUT plug on a two-way
Signal Splitter (not supplied).
Connect two lengths of RF
Coaxial Cable (F-type connectors
on both ends) to the two OUTPUT
plugs on the two-way Signal
Splitter.
<|> Connect the twin OUTPUT
plugs on the Signal Splitter to the
ANT A and ANT B Inputs on the
rear of the TV.
continue to next page
S mart H i : li >
For other possible PIP
# connections see page 47 for
the "More PIP Connections"
section.
If you need any accessories or
parts to complete the described
PIP connections, contact your
dealer, or our Parts Information
Center at (1-800-292-6066), for
details.
- MAIN screen -
Display signal supplied
primarily through
ANT A Input on rear
- PIP WINDOW -
Display signal supplied
primarily through ANT
B Input on rear of TV.
Combination VHF/UHF Antenna
300 to 150. Adapter
OPTIONAL TWO
WAY SIGNAL
(single 75ohm Input to twin 75 ohm Outputs -
optional RF Coaxial connecting cables also
required)
ANT(enna) B
Input
Note: The purpose of the ANT B input is to
provide an easily connected, dedicated picture
source for PIP feature use. Other signal source
options (such as a satellite dish system, additional
external antenna, VCR, or Video Game) could also
be connected and displayed on the TV’s PIP screen
window through the use of the ANT B input.
Cable TV
Company
See the Set-Up Guide also provided with
your TV set for further Cable TV connection
options and accessories.
42