Vcr/alx inputs, Connect the audio out, Select the "aux 1" picture source select – Philips 8P4841C199 User Manual
Page 28: Sing, Udio, Ideo, Nput, Acks
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
□i
U
sing
the
A
udio
A^
ideo
I
nput
J
acks
VCR/ALX INPUTS
7
'^he TV's AudiolVideo Input
jacks are for direct picture and
sound connections between the TV
and a VCR (or Video Disc Player,
etc.) that has AudiolVideo Output
jacks.
To view the playback of a VCR
tape by using the AudiolVideo
Input jacks on the TV:
C BEGIN]
Connect the VIDEO OUT jack
from the VCR to the AUX 1
VIDEO IN jack on the TV.
Connect the AUDIO OUT
jacks R(ight) and L(eft) from the
VCR to the AUX 1 AUDIO IN
jacks on the TV.
Select the "AUX 1"
PICTURE SOURCE SELECT
control on the TV.
With the FEATURES MENU on
screen, move the REDJiighlight
with the MENU (M) ^•►buttons.
Then press the MENU button.
<|> Press the MENU AV and
MENU (M) buttons to highlight
and select (u^) the AUX 1 mode.
^^Turn the VCR ON and press
PLAY to view the tape on the
TV.
S
mart
H
kup
Remember, after it is
^connected an easy way to
select the AUX 1 mode is to press
the VCR button on the front of the
TV (or the TV/VCR button on the
remote.) Channels 3/4, ANT A/B,
AUX 2/3, and the last channel
viewed can also be selected in this
way.
If you have added AUX 1 to the
TV's channel memory (see page
14), just press the CHANNEL
AT buttons to select the AUX 1
mode.
PICTURE AND SOUND FROM
PLAYBACK OF VCR TAPE
NOTE: Connections and use of the
TV's AUX 2 Audio/Video Input jacks
are the same as for the AUX 1 Jacks
(except "AUX 2" is selected as the
Picture Source in step 3).
If you have a single (monaural)
Audio Output VCR, "Y" connectors
are available to complete your
connection. Contact your dealer, or
our Parts Information Center (1-800-
292-6066) to order any optional
accessories.
28