Philips 8P4841C199 - Manual (Page 12)

F eature M enu C ontrous ( continued )
CABLE TUNING
y ou need to make sure the TV is
set to pick up either Cable TV
or Antenna signals. In other words,
the TV needs to know if you
connected a Cable TV signal or a
normal antenna to its ANTENNA
plug.
NOTE: If you went through First
Time Setup (in your Quick Use
Guide), this task has already been
completed for you.
C begin J
Select CABLE CHANNEL
TUNING control.
With the FEATURES MENU on
screen, move the REI^highlight
with the MENU (M)^*^ buttons.
Then press the MENU button.
<|> Press the MENU AT buttons
to move the RED highlight. Press
the MENU button to select (u^) the
desired mode - For Example:
CABLE.
CABLE- If you DO have
Cable TV connected
to the TV. Channels
1-125 available.
NORMAL- If you have an
Antenna connected
to the TV. Channels
2-69 available.
Press the STATUS button to
clear the screen.
FEATURE MENU
CLOSED i
captions !
s
Q
(5Z5EH
POS HsWAP H FREEZE I
PIPI
2TUNI^IP^__^
Note: Both ANT(enna) A and ANT B inputs
on the rear of the TV can be set for the correct
connected signal (either an Antenna or Cable
TV source).
12