Philips 8P4841C199 - Manual (Page 26)

S
ound
M
enu
C
ontrols
(
continued
)
TV SPEAKERS
W 'ould you like to hear TV
programs through your audio
hi-fi system? The TV's Variable
Audio Output jacks and TV
Speaker OniOff control work
together to offer you this TV sound
option.
i begin )
Connect the R(ight) and L(eft)
VARIABLE AUDIO OUT jacks
on the TV to the R and L Audio
Input jacks on your amplifier or
sound system.
Set the audio system's volume to
normal listening level.
<|> Turn the TV and audio system
ON. You can now adjust the sound
level coming from the audio
system with the Volume AT
buttons on the TV or remote.
To hear the TV sound from only
the audio system speakers, select
TV SPEAKERS control.
With SOUND MENU (2 of 3) on
screen, move the REI^highlight
with the MENU (M)^*^ buttons.
Then press the MENU button.
Press the MENU AT and
MENU (M) buttons to highlight
and turn OFF (i>) the TV
SPEAKERS control.
You should now only hear TV
sound coming from the audio
system speakers.
Press the STATUS button to
clear the screen.
S mart H elp
Remember, the audio
S system may have to be in
AUX(iliary) mode to play sound
from the TV (Outputs).
Note: When the TV SPEAKER
control is set to "NORMAL” (for
TV speaker operation) make sure
the VARIABLE AUDIO OUTPUT
control (see next page) is also set
to "STEREO" in order for the TV’s
AUDIO OUTPUT jacks to work
properly.
NOTE: The TV’s PIP AUDIO
OUTPUT jacks can also be used for
additional stereo playback options
such as wireless transmitter headphone
hook-up, or as an external amplifier
connection source. However, with
normal PIP feature operations (when
the ANT A and ANT B Input sources
are connected for use), the PIP
AUDIO OUTPUTS will switch from
stereo to monaural (mono) sound.
Stereo sound will only be available
with the TV’s Main screen (or ANT A
supplied signal) at that time.
1'^ I TV SPEAKERS OFF |
AUDIO IN
(RED/WHITE)
VARIABLE
AUDIO
OUTPUT JACKS
26