Shutting down the system – Compaq R6000 User Manual
Page 53
3-6 Compaq R6000 Series UPS Operation and Reference Guide
■
Battery Mode
❏
Yellow LED 2 is on.
❏
Batteries are not being charged.
❏
Power is available at UPS outputs.
❏
Shutdown process has begun.
■
Sleep Mode
❏
All LEDs are off.
❏
This mode is optional and can be enabled or disabled using the
LCD menu. The default value for Sleep mode is “disabled.” If
SLEEP MODE is enabled, the UPS shuts down when on battery
power and the load is less than 8%.
❏
Power is automatically restored to the output receptacles when
utility power is restored.
Shutting Down the System
To shut down the system:
1. Place the UPS on Standby.
2. Disconnect the mains by opening switch or circuit breaker at the utility panel.