Cypress CY7C1425AV18 - Manual (Page 17)

CY7C1410AV18, CY7C1425AV18
CY7C1412AV18, CY7C1414AV18
Document #: 38-05615 Rev. *E Page 17 of 29
Identification Register Definitions
Instruction Field
Value
Description
CY7C1410AV18 CY7C1425AV18 CY7C1412AV18 CY7C1414AV18
Revision Number
(31:29) 000 000 000 000 Version number.
Cypress Device ID
(28:12) 11010011010000111 11010011010001111 11010011010010111 11010011010100111 Defines the type of
SRAM.
Cypress JEDEC ID
(11:1) 00000110100 00000110100 00000110100 00000110100 Allows unique
identification of
SRAM vendor.
ID Register
Presence (0) 1 1 1 1 Indicates the
presence of an ID
register.
Scan Register Sizes
Register Name Bit Size
Instruction 3
Bypass 1
ID 32
Boundary Scan 109
Instruction Codes
Instruction Code Description
EXTEST 000 Captures the input and output ring contents.
IDCODE 001 Loads the ID register with the vendor ID code and places the register between TDI and TDO.
This operation does not affect SRAM operation.
SAMPLE Z 010 Captures the input and output contents. Places the boundary scan register between TDI and
TDO. Forces all SRAM output drivers to a High-Z state.
RESERVED 011 Do Not Use: This instruction is reserved for future use.
SAMPLE/PRELOAD 100 Captures the input and output ring contents. Places the boundary scan register between TDI
and TDO. Does not affect the SRAM operation.
RESERVED 101 Do Not Use: This instruction is reserved for future use.
RESERVED 110 Do Not Use: This instruction is reserved for future use.
BYPASS 111 Places the bypass register between TDI and TDO. This operation does not affect SRAM
operation.
[+] Feedback