beautypg.com

General safety warnings, Working around the scanner – Canon DR-4080U User Manual

Page 5

background image

3

General safety warnings

Always follow these general safety warnings to prevent personal injury.

Working around the scanner

Follow these warnings while working around the scanner.

• To avoid the hazards of fire and electrical shock, never expose this device to rain or any type of moisture.

• To avoid the hazard of fire, never block the fan exhaust vent.

• Never install and operate the scanner near flammable substances such as alcohol, thinner, acetone, or any other

type of volatile material.

• Never damage or modify the power cord and never place heavy objects on the power cord.

• To avoid severe electrical shock, make sure that your hands are dry before you handle the power cord.

• Never plug the scanner power cord plug into a multi-plug power strip.

• Never bundle, wrap, or tie the power cord around itself or another object.

• Connect the power plug securely to the power source and make sure no part of the metal plug is exposed.

• Use only the power cord and plug provided with the scanner.

• To avoid serious injury or damage to the scanner, never disassemble the scanner. Some parts inside the scanner

become extremely hot and carry high voltage.

• Never use flammable aerosol products near the scanner, such as adhesive sprays, air fresheners, insect repel-

lent, etc.

• Before cleaning the scanner, always switch off the power and disconnect the scanner power cord from the power

source.

• Use only a soft, damp cloth soaked in water and a small amount of mild detergent to clean the scanner. Wring the

cloth completely before you wipe the exterior of the scanner.

• If you hear strange sounds, sense vibration, or smell odd odors around the scanner, switch the scanner off imme-

diately and disconnect the power cord from the power source. Call for service immediately.

• To avoid damage from shock and vibration, always have two people lift or carry the scanner. If you suspect that the

unit has been accidentally damaged, switch the scanner off and immediately disconnect the power cord from the

power source. Call for service.

• Before lifting or moving the scanner, always switch the scanner off and remove the power cord from the power

source.

• WARNING! TO AVOID DAMAGE TO YOUR EYES, NEVER LOOK DIRECTLY INTO THE SCAN-

NING LIGHT.