Canon DR-4080U - Manual (Page 19)

17
Setting how the scanner operates
Before each scanning job, you can set up operation parameters that determine how the scanner operates. In
this section, we will show you how to open and use the menus to perform operation settings.
Setting the scan mode
Press the Scan key to open the Scan menu and select the scanning density, scanning speed, and other
settings that determine the conditions of the scanning job. Selecting a setting other than Host will invali-
date any settings made by the application running on your host computer.
Display panel
Scan Counter
Imprint Home
DR - 4080U
Ready/Error
Select
Mode
Start / Stop
Others
Setting up the scanner
1
Press the Scan key.
2
Press the up or down Mode arrow
key (
▲ ▼ ) to display the scanning
mode that you want to select.
(
➞ 18 to 20)
3
Press the right or left Select key
( ) to display the settings for the
selected mode.
4
To save the setting and return to
standby (Ready) press the Home
key.
-or-
If you want to perform other settings
before returning to standby, press
the desired menu key.
Counter ➞ 22
Imprint ➞ 24
Others ➞ 26
0 1 . F . B r i g h t n e s s
D – – – – + – – – – L H o s t
0 7 . B . C o n t r a s t
D – – – – + – – – – H H o s t
0 7 . B . C o n t r a s t
D – –
*
– + – – – – H L 2
R e a d y
0 1 . D i s p . C o u n t e r
S c a n
1
2 3 4
Then press the right or left Select key ( ) to select the settings.