Texas Instruments SLLU039B - Manual (Page 5)

v Read This First
Preface
How to Use This Manual
This document contains the following chapters:
- Chapter 1—The M-LVDS Evaluation Module
- Chapter 2—Test Setup
- Chapter 3—Bill of Materials, Board Layout, and PCB Construction
- Appendix A—Schematic
Related Documentation From Texas Instruments and Others
- Introduction to M-LVDS (SLLA108)
- LVDS Designer’s Notes (SLLA014A).
- Reducing EMI With Low Voltage Differential Signaling (SLLA030B).
- Interface Circuits for TIA/EIA−644 (LVDS) (SLLA038B).
- Transmission at 200 Mpbs in VME Card Cage Using LVDM (SLLA088).
- LVDS Multidrop Connections (literature number SLLA054).
- SN65MLVD20x data sheets, Multipoint-LVDS Line Drivers and Receivers,
(SLLS573 and SLLS558)
- Electromagnetic Compatibility Printed Circuit Board and Electronic
Module Design, VEC workshop, Violette Engineering Corporation.
FCC Warning
This equipment is intended for use in a laboratory test environment only. It
generates, uses, and can radiate radio frequency energy and has not been
tested for compliance with the limits of computing devices pursuant to subpart
J of part 15 of FCC rules, which are designed to provide reasonable protection
against radio frequency interference. Operation of this equipment in other
environments may cause interference with radio communications. In which
case the user, at his own expense, is required to take the necessary measures
to correct this interference.