Cabletron Systems 6H203-24 - Manual (Page 57)

SIMM Upgrade
Switch Settings, Upgrades, and Installations B-3
• Switch 8 – Reset Password/Community Strings. Changing the position of this switch clears
only the user-entered passwords stored in NVRAM, and restores the default passwords. Once
the module is reset, the passwords can either be reentered or the default passwords (Public and
ENTER) may be used.
B.2 SIMM UPGRADE
Memory upgrade is available for the SmartSwitch modules to expand the DRAM to 32 MB. This
section explains how to locate and add/replace a Single In-line Memory Module (SIMM). For
information on the available SIMM upgrades, contact Cabletron Systems. For details on getting
help, refer to
Section 1.2 .
B.2.1 Locating SIMMs
Figure B-2 shows the location of the DRAM SIMM connector.
Figure B-2 SIMM Slot Locations
NOTE
Do not change the position of switch 8 unless it is necessary to reset the module
super-user configured passwords to their factory default settings.
DRAM SIMM