Cabletron Systems 6H203-24 - Manual (Page 33)

Installation 3-1
3
Installation
This chapter covers the following items:
• Unpacking the Module ( Section 3.1 )
• Installing Options ( Section 3.2 )
• Installing the Module into the 6C105 Chassis ( Section 3.3 )
• Connecting to the Network ( Section 3.4 )
• Completing the Installation ( Section 3.5 )
3.1 UNPACKING THE MODULE
1. Open the box and remove the packing material protecting the module.
2. Verify the contents of the carton as listed in Table 3-1 .
Only qualified personnel should install the SmartSwitch modules.
NOTE
Read the Release Notes shipped with the device to check for any exceptions to the
supported features and operation documented in this guide.
Table 3-1 Contents of Shipping Container
Item Quantity
6H203-24 or 6H253-13 1
Manual Accessory Kit 1